I am very new to the 300SRT8 as I just picked mine up yesterday. What an amazing car for the money. Anything I need to know?
↧
New 2013 300SRT8
↧
F/S: 22x9 300c SRT wheels w/tires+sensors ( Detroit, MI )
Thinking about getting something different.
These are machine finish, but currently plasti-dipped black.
No damage to wheels, though could use re-cleared if you wanted the original look.
Tires are only 3 months old. Nexen Roadian 265/35/22
Will consider trades.. Looking for wheels, parts, etc.
If I have to put a price.. I'll start at $1500.
![]()
I'll try to get better pictures tomorrow.
These are machine finish, but currently plasti-dipped black.
No damage to wheels, though could use re-cleared if you wanted the original look.
Tires are only 3 months old. Nexen Roadian 265/35/22
Will consider trades.. Looking for wheels, parts, etc.
If I have to put a price.. I'll start at $1500.
I'll try to get better pictures tomorrow.
↧
↧
F/S: Sale!
Dallas ft.worth area. All items off a 300c. 1. Nav bezel $60 2.carbon fiber engine cover $175. 3. Painted ABS and strut covers $80 4. Sub and box $60 5.half covers $120 paint code:PA4
![]()
. ![]()
![]()
![]()
![]()
. Also have a predator for v8 $200
. 
. Also have a predator for v8 $200↧
Strut Tower Covers
When I installed my Mopar Strut Brace I had to remove the factory strut covers. Since the factory covers don't fit back on I got a set of Strut Tower Covers from Billet Technologies. Here are some before and after photos.
![]()
![]()
![]()
![]()
![]()
![]()
↧
F/S: Custom Painted USW Forged Wheels w/ tires
For Sale:
22" USW Forged Wheels (STR8)
Fronts 22x9.5
Rears 22x10.5
Tires (Federal) Less than 2000 miles since installed new
Fronts 265x30R22
Rears 285X30R22
Set is mounted, balanced w/ TPM's for 2013 Chrysler 300 and ready to bolt on. I also have TPM's for a Charger if needed.
Also included:
*Two complete sets of black chrome Gorilla locking lugs in short and long lengths for better fit with the staggered wheels.
*MGP Caliper Covers (Red)
Price: $3500
Location:
Tomball, TX 77375
Contact:
Mike
832-656-4221
![]()
![]()
![]()
22" USW Forged Wheels (STR8)
Fronts 22x9.5
Rears 22x10.5
Tires (Federal) Less than 2000 miles since installed new
Fronts 265x30R22
Rears 285X30R22
Set is mounted, balanced w/ TPM's for 2013 Chrysler 300 and ready to bolt on. I also have TPM's for a Charger if needed.
Also included:
*Two complete sets of black chrome Gorilla locking lugs in short and long lengths for better fit with the staggered wheels.
*MGP Caliper Covers (Red)
Price: $3500
Location:
Tomball, TX 77375
Contact:
Mike
832-656-4221
↧
↧
Rim help
↧
Swirl flaps default position
Hi all
Whats the default position for the flaps open or closed.
cheers
Whats the default position for the flaps open or closed.
cheers
↧
SOLD, now missing
Sold my Matte Black 300c Wagon/Touring SRT8 recently and it has gone to a very good home, someone who already owns some V8 muscle; but I am missing the car badly.
I've yet to make my mind up regarding a classic Charger or Challenger or the latest 392ci/6.4L Challenger. Trying to work out if it's cheaper to import direct from USA rather than go via the usual American Car dealers here in the UK which I find are slightly over the top with their prices at 46k pounds for the new Challenger that equates roughly to 70k+ USD when you can buy them nearly new in the US for 25-30k USD that's is more like 16-19k GBP and with import taxes etc... another 2k to me that is still half the price nearly. Anyone imported anything recently and gone down the route of doing it yourself?
I've yet to make my mind up regarding a classic Charger or Challenger or the latest 392ci/6.4L Challenger. Trying to work out if it's cheaper to import direct from USA rather than go via the usual American Car dealers here in the UK which I find are slightly over the top with their prices at 46k pounds for the new Challenger that equates roughly to 70k+ USD when you can buy them nearly new in the US for 25-30k USD that's is more like 16-19k GBP and with import taxes etc... another 2k to me that is still half the price nearly. Anyone imported anything recently and gone down the route of doing it yourself?
↧
rolling road graphs and results?
im just interested if has got any rolling road graphs/printouts they would like to post up please and state your mods please. does anyone have red or yellowstuff pads on the rear as I have yellows on the front already.
hope your all having a good day and that your cars are all going good?
hope your all having a good day and that your cars are all going good?
↧
↧
drivers side rear door handle
hi everyone, im looking for a chrome rear drivers side door handle as one of the kids has managed to bloody break mine as they are only made of plastic?
thanks in advance Timmo
thanks in advance Timmo
↧
NAG1 plug / only drives in one gear
hi new to this,
I have a 2007 plate 3.5 300c 72k on clock
its being going into limp mode often past few days ive read up and seen about fluid getting into the NAG1 plug connector so today unplugged this and cleaned it (as waiting on new one coming) plugged it back in and now the car starts and drives but only in what I think is second gear , the EML light is staying on too
any thoughts would be a great help
thanks!
I have a 2007 plate 3.5 300c 72k on clock
its being going into limp mode often past few days ive read up and seen about fluid getting into the NAG1 plug connector so today unplugged this and cleaned it (as waiting on new one coming) plugged it back in and now the car starts and drives but only in what I think is second gear , the EML light is staying on too
any thoughts would be a great help
thanks!
↧
funny 300C Advert
Never seen this before - quite amusing
↧
Nw cruise
https://www.facebook.com/NWcruise
like this page to get cruise invites in Washington area. their will be meets cruises monster will sponsor so like and lets get this party going
like this page to get cruise invites in Washington area. their will be meets cruises monster will sponsor so like and lets get this party going
↧
↧
08 charger hemi front rotors on 06 300 srt8
Will those fit on mine srt8 ?
They measure 13.5 in dia.
Thank you
They measure 13.5 in dia.
Thank you
↧
Error code P0299
Hi,
can someone out there help me, earlier today whilst driving to work the engine management light came on, I took to a local dealer and they said it was showing error code P0299 and that the turbo would need replacing.
being naïve I asked them how much it would costs to replace, the response I got floored me. they wanted £3,400 for the turbo + Vat + fitting.
does this sound right? the car isn't worth much more than that as its a 2006 with 130k on the clock. can anyone else point me in the direction of what really is the issue as I have seen a few people report this code but they never mention a new turbo
can someone out there help me, earlier today whilst driving to work the engine management light came on, I took to a local dealer and they said it was showing error code P0299 and that the turbo would need replacing.
being naïve I asked them how much it would costs to replace, the response I got floored me. they wanted £3,400 for the turbo + Vat + fitting.
does this sound right? the car isn't worth much more than that as its a 2006 with 130k on the clock. can anyone else point me in the direction of what really is the issue as I have seen a few people report this code but they never mention a new turbo
↧
F/S: 06 300 srt8 stock exhaust
Have stock srt8 exhaust from cross over to mufflers (No exhaust tips) 125.00/best local pickup only Detroit metro area...
↧
2005 Chrysler 300c Navigation
Ok, so the little nob that controls the navigation is messed up on my system, and I don't wanna get a new nav or replace it myself or pay somebody to replace it.
Is there anyway you can control the nav selections other than the knob?
I've tried steering wheel controls, no luck..
Ps; The knob does work.. You just have to press down really hard then control it, and sometimes it doesn't even work at all.
Is there anyway you can control the nav selections other than the knob?
I've tried steering wheel controls, no luck..
Ps; The knob does work.. You just have to press down really hard then control it, and sometimes it doesn't even work at all.
↧
↧
Cars and Coffee in VA Beach
↧
WTT: Trading in my 300 SRT8
Hey guys, I am trading in my 2012 Chrysler 300 SRT8, I have Nitto NT05s 275/40/20 and 315/35/20 with about 1,000 miles on them... I want to trade you for your stock tires, and $500 cash, and you can have my tires... Let me know, I am trading in on Tuesday....
↧
Alarm keeps going off.
My turn for problems now. Last night and tonight the car alarm has gone off for no obvious reason. All doors and windows are shut properly and the car doesn't appear to have been interfered with.
Any ideas?
Is it possible to lock the car without arming the alarm?
Edit: Just been reading some of the past "Alarm" threads. I'll have a look at the easter egg and see what the last chime was.
Any ideas?
Is it possible to lock the car without arming the alarm?
Edit: Just been reading some of the past "Alarm" threads. I'll have a look at the easter egg and see what the last chime was.
↧
